Hey tapping on your expertise again! been tryng to get the top dash rail off today have undone the three bolts (one in the middle and one on either end) but i can't seem to tease it off is there anything else i need to undo?
Dadh rails
Started by
Mini_bitz
, Nov 05 2005 04:53 PM
4 replies to this topic
#1
Posted 05 November 2005 - 04:53 PM
#2
Posted 05 November 2005 - 05:48 PM
no i think thats all that holds it on, but mine was easier because i'd taken the screen out.
i expect its just stuck where its been on so long
i expect its just stuck where its been on so long
#3
Posted 05 November 2005 - 10:59 PM
i was told it's LOADS easier with the screen out, but it's still possible with it still in.....jiggle it about abit! might just be that it's a little cus as it's been there so long like ian said!
let us know how it goes?? are you taking it off for anything excting?
let us know how it goes?? are you taking it off for anything excting?
#4
Posted 05 November 2005 - 11:09 PM
took mine off without the screen removed.... it took a bit of force actually but nothing was broken or bent.... the way i did it was to get a screwdriver at one end and lever it up, get it at the other and lever it up then try n pop it out from the gap between the screen and dash rail in the centre
hope this is useful.... if you understand what i just said
charlie
hope this is useful.... if you understand what i just said
charlie
#5
Posted 06 November 2005 - 11:44 PM
I had the same problem as you have.
My solution, before getting an axe and destroying it .... was to call my expert mate and have him come to my garage. :smartass:
Took him about 60 seconds to get it off. :saywhat:
He did something like YoungUn said.
Sorry I didnĀ“t help but I know your pain at this point
My solution, before getting an axe and destroying it .... was to call my expert mate and have him come to my garage. :smartass:
Took him about 60 seconds to get it off. :saywhat:
He did something like YoungUn said.
Sorry I didnĀ“t help but I know your pain at this point
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users