hello there people of TMF
im here to offer my services as a CNC machinist to you people. i will try to do things for free if i can depending or the material used and how much of it. all i need is a drawing with all the dimensions on it or even better a CAD drawing in .dxf format. i can make things to within 2 microns so the dimensions you give me will be exact. obviously these two glorious machines arent mine (unfortunatly) so you will have to wait til i get a free slot in my work load.
if we havent got the material at work then feel free to send me a bit.
Cnc Machinist At Or Service
Started by
The Colonel
, May 09 2010 09:06 PM
3 replies to this topic
#1
Posted 09 May 2010 - 09:06 PM
#2
Posted 13 May 2010 - 09:10 PM
sounds good mate is there any limits on size and thickness?
cad drawings would be no prob for me, will keep you in mind
cad drawings would be no prob for me, will keep you in mind
Edited by shaddy, 13 May 2010 - 09:11 PM.
#3
Posted 13 May 2010 - 09:18 PM
will be in touch next week regarding a few things....
#4
Posted 16 May 2010 - 08:32 PM
sizes ummm not quite sure ill have a measure up. an thickness i wont machine anything under 5mm cause it'll move when the pulse cuts.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users