10 replies to this topic

[jacko616]

i know its probably a long shot but i have 5 13x7 ultralight extreme wheels, they all have budget tyres, two of them are getting abit low but still have some miles in them. They are in reasonable condition, with some light curb damage and a little light corrosion around the split rim bolts (not noticeable when wheels are on the car). the breaks have only been on the car around three weeks, they have new ebc greenstuff pads and the disks are in good condition, all bleed nipples fine.

i am looking for a 7.5 inch disk set up and a set of wheels. Preferably the brakes would fit straight on the car with pads etc, however i can make exceptions.

Wheels wise, they need to be quite wide, at least 6". would like a set of 5 but would settle for 4. To be honest as long as they are nice wheels i really dont mined the condition, as long as they are still round and not too much curb damage. tyres would be preferable.

heres some pictures

Here you can see some of the curb damage.
This is the worst tyre, tread wise.
Brakes




Thanks

Edited by jacko616, 03 June 2010 - 11:12 AM.

[jacko616]

Bump? Anyone?

[j-b_2009]

Bump? Anyone?

nothing else youd consider a swap for? or sell outright?

[jacko616]

In regards to a different swap no, i am afraid as the car is my daily.

However i will sell for the right price but would like to sell as a set, i.e brakes and wheels.

Cheers

[j-b_2009]

In regards to a different swap no, i am afraid as the car is my daily.

However i will sell for the right price but would like to sell as a set, i.e brakes and wheels.

Cheers

what calippers are on them? theyll be going on a b16a2 mini so i wanted some 4pots ideally

[mk3 Cooper S]

What are you after for the brakes.

I could p/x you a decent set of 8.4 brakes if you need to keep your car on the road?

In fact I have a set of 10x 6 wellers that will run with the 8.4 brakes if you want to run 10's ?

Edited by mk3 Cooper S, 15 June 2010 - 01:51 PM.

[jacko616]

what calippers are on them? theyll be going on a b16a2 mini so i wanted some 4pots ideally

They are 4 pot calipers from a metro with vented disks, braided hoses and ebc green stuff pads.

As everything is included to use the brakes and no refurbishing is needed i would be looking for about £180 for the brakes.

Wheels wise i would want £300 as it is a set of 5, with three very good tires and two low ones (still legal though).

As for the wellers, thank you but ill have to pass, i would like alloys really.

Also i have a motorbike i can use while the car is of the road so although i would like a quick sale/swap to keep the time the car is of the road as short as possible its not the end of the world if i cant use it for a few days/a week.

[minilimo]

i have a set of discs callipas 7 1/2 but i i have 10" set up do you have anything else on offer please
cheers
BD

[jacko616]

i have a set of discs callipas 7 1/2 but i i have 10" set up do you have anything else on offer please
cheers
BD

So are you saying that you have a 7.5" brake set up(for swap) but already have a 8.4" 4 pot one?

The only other thing i have to offer is a stage one exhaust with lcb manifold.

cheers

[jacko616]

bump?

[minilimo]

what im sayinin is i have the 7.5 discs with calipers you wouls need the hub but a std one will do . i allready have my other 10" setup so no longer need but i also do not need these so im askin what else you got , ? im after front lowered coilovers atthe moment or a performace head for a mpi or large throttle body for a mpi or just let me know what ya got i like gadgets and various other boy toys
cheers
Steve email me at [email protected]