12 replies to this topic

[cainejo]

Hello here I put the things about this engine that I can not put in place so that if anyone knows about this because I East lost all patience I have:

1293 MINI MOTOR C.C.
"Lighten CRANKSHAFT AND FLYWHEEL
Nitride-CRANKSHAFT
CAMSHAFT-C-AEA 731
-Lightening rods
Forged piston-ROUTE
-HEAD REDUCED, ENLARGED THE CHAMBERS, POLISHED bigger valves (the proper equipment)
-CHANGE STRAIGHT PINE CLOSE RELATIONSHIP
3.65-FINAL RATIO
PINION-PRIMARY LAYGEAR: 15, 19, 23, 25
"CHANGE IS, 17, 21, 26, 31

TECHNICAL PROBLEMS AND SYMPTOMS ARE:

-LACK OF FORCE IN THE OUTPUT (WHEN COMES TO backfiring and firecrackers DEJA 2500) and once COGE 2500 RPM AS A SHOOTING VA

WE HAVE TESTED WITH DIFFERENT CARBURETORS AND THEIR SYMPTOMS
DECO-Webb 45, 40 AND HIS DOUBLE DCOM

SAME WITH THAT TURNED THEIR SYMPTOMS
DELCO PLATINUM-MINI
METRO-DELCO PLATINUM
METRO-POWER ELECTRONIC


PLEASE HELP TO PUT A CAR POINT

THANK YOU


[email protected]

[HARBER07]

[Brams96]

what the hell? I cant understand a thing about that.

[cainejo]

HOLA NO SPEAK ENGLISH NOT UNDERSTAND what the hell?
NOT IN MY COMING I've written

[mk1leg]

Hi.. is there someone you Know who can translate your problem into English.................???

are you having problems putting engine together...?????

or are you having problems trying to start engine.....?????

or are you having trouble running......????

.............

[cainejo]

the engine is completely assembled armed only lack the motor tuning

[MRA]

There is a minority that should be ashamed of themselves !!!

The OP has out of desperation tried to get a positive result to their query, laughing is not the way forward

[Nelson92]

try this : http://translate.google.com/#

put in basic sentences. should help.

[cainejo]

forgive for my English, do not know much but I have two minis and I love classic mini world.
but in a mini I have a problem with the engine and after installing it all When it has to start the car backfires and will not accelerate
thanks for everything

[AndyMiniMad.]

Hi cainjo. sounds like your timing is out. start at 10 degrees before top dead center and the adjust from there.
hope you find this helpfull.

[MRA]

Hola,

Try the following

Ignition timing -- Regulación de encendido

Cam timing -- sincronización del árbol de levas

valve to rocker clearance --- separación de la válvula

HT leads in correct order -- plomos de la alta tensión

[Nelson92]

Hola,

Try the following

Ignition timing -- Regulación de encendido

Cam timing -- sincronización del árbol de levas

valve to rocker clearance --- separación de la válvula

HT leads in correct order -- plomos de la alta tensión

[bmcecosse]

Maybe the camshaft is not timed in correctly, if all else fails - take the cover off and check. But most likely - it is the ignition timing. Just a thought - are the spark plug leads on correct order - 1342 anti-clockwise around the dizzy ?

Edited by bmcecosse, 07 June 2010 - 07:31 PM.