Hello, I was just wondering what part this is so i can replace it because it is rusty.
[attachment=100413:DSC_0300.JPG]
[attachment=100414:DSC_0301.jpg]
Anybody know?
Thanks Guys.
What Is This?
Started by
Liam-MPi
, Jul 07 2010 05:25 PM
7 replies to this topic
#1
Liam-MPi
-
- Noobies
-
- 58 posts
Stage One Kit Fitted
- Local Club: Not as yet.
Posted 07 July 2010 - 05:25 PM
#2
L400RAS
-
- Traders
-
- 2,479 posts
Up Into Fourth
- Local Club: Lincolnshire Mini Owners Club
Posted 07 July 2010 - 05:27 PM
that is the breather cannister on the flywheel housing
#3
Sleepy Stu
-
- TMF+ Member
-
- 2,564 posts
formerly Stewart_GT
- Location: Worcestershire
Posted 07 July 2010 - 05:29 PM
Clutch crankcase breather!
#4
Liam-MPi
-
- Noobies
-
- 58 posts
Stage One Kit Fitted
- Local Club: Not as yet.
Posted 07 July 2010 - 05:30 PM
Thanks for your help.
As u can see, it could do with replacing, do you know where i could get one?
Cheers.
As u can see, it could do with replacing, do you know where i could get one?
Cheers.
#5
RayBoogs
-
- Members
-
- 1,109 posts
One Carb Or Two?
#6
Liam-MPi
-
- Noobies
-
- 58 posts
Stage One Kit Fitted
- Local Club: Not as yet.
Posted 07 July 2010 - 05:46 PM
#7
bmcecosse
-
- Members
-
- 9,699 posts
Crazy About Mini's
- Local Club: http://www.srps.org.uk/
Posted 07 July 2010 - 07:53 PM
It will be quite a job to get at it - to renew it. Why not just paint it!
#8
1984mini25
-
- Members
-
- 8,785 posts
Crazy About Mini's
- Location: -
Posted 07 July 2010 - 07:57 PM
Same it's only an oil trap, don't exactly fail and then need replacing. Might be come blocked up, but even then you don’t need to replace it, jut clean it out.
If you must, remove it, clean it up (sand the rust off) paint it up and refit with a new gasket.
If you must, remove it, clean it up (sand the rust off) paint it up and refit with a new gasket.
Edited by 1984mini25, 07 July 2010 - 07:58 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
