hi guys,
i've just recently purchased a mini as a project, basically its got drums all round and i was wanted to convert the fron to discs. is this possible? what parts do i need to source? will i need a brake servo? and can i take this from anther car?
brakes
Started by
robbo
, Nov 30 2005 05:57 PM
6 replies to this topic
#1
Posted 30 November 2005 - 05:57 PM
#2
Posted 30 November 2005 - 06:01 PM
Get a complete 8.4" disc setup from a later mini including driveshafts etc. Should be around £50.
You WILL have to run 12" wheels because 10's wont fit.
You should replace the rear drums and studs with the spacered type from the later minis as the track will be different if not.
You dont have to use a servo, personal choice that.
Search theres previous posts on how to do this not long ago.
You WILL have to run 12" wheels because 10's wont fit.
You should replace the rear drums and studs with the spacered type from the later minis as the track will be different if not.
You dont have to use a servo, personal choice that.
Search theres previous posts on how to do this not long ago.
#3
Posted 30 November 2005 - 06:01 PM
Welcome to The Mini Forum also.
#4
Posted 30 November 2005 - 06:28 PM
Hello You will also need new rear brake cylinders as the ones for drums have a different bore to the ones for discs.
#5
Posted 30 November 2005 - 08:29 PM
Really :erm: ?Hello You will also need new rear brake cylinders as the ones for drums have a different bore to the ones for discs.
Can anyone confirm this?
#6
Posted 30 November 2005 - 10:09 PM
Erm yes really ! Well unless you like an 'interesting' drive where the rear end likes to go before the front end !!!Really :erm: ?
Can anyone confirm this?
Yes, girls are allowed to have knowledge about cars !!!! :tongue:
#7
Posted 30 November 2005 - 10:23 PM
Yes it is true.
I had changed mine, but forgot to mention.
I had changed mine, but forgot to mention.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users