2 replies to this topic

[obp.ltd]

Hi all,

If anyone needs technical advice about our products feel free to post on here or PM me.

If you are unsure about fitting our products, we do have some simple fitting guides for certain products that we can then email you if necessary.

Thanks all.

[GreaseMonkey]

Not meaning to offend or anything but when I looked into buying a set of these it seems even though it is marketed as developed for "Classic Mini" there's still a bit of fabrication needed to fit. I know more than one person who bought a set led to believe it would be simple but have ended up racking their brains out on fitment and not happy with the end result, even from the instructions it seems that the accelerator pedal even needs drilling and a slot cutting for the cable? I think you are misleading some people as it seems the only orientation towards mini fitment is the specially chosen master cylinders to suit the braking system.

[obp.ltd]

Sorry that you think that but I can tell you now were not misleading anyone.

These were made in conjuction with Moss Europe, one of the leading mini and classic car part suppliers, plus they were designed and tested with Oz, the leading classic mini specialist at Moss.

Can I note, that our pedal boxes are for race cars, which are always heavily modified cars, you cannot expect a pedal box to just slip in place and work without a bit of work.

Also, we have very easy and simple fitting instructions for these Pedal Boxes, as they are on of our highest selling pedal boxes.

If you would like me to send you these instructions, feel free to give me your email.

Thanks