No replies to this topic

[proyectoN]

We´re running 4pots at the front and xsara calipers at the rear. We've found out that the mini standart brake master cylinder won't move enough fluid to operate the 4pots...

After some research on the forums we have found people who use a clutch master cyilder and a bias valve in order to solve this problem. Would these really work out? What is the cheapest MC we could use in our project? Would it be enought with the splitted 2 circuit yellow tag MC?




How do you calculate the diameter of the recuired MC and the amount of fliud you need?



thanks a lot,

Group N-10

(sorry it should say master cylinder instead of brake pump in the title) admin?

Attached Files

•  GMC227.jpg   18.87K   4 downloads

Edited by proyectoN, 01 September 2010 - 10:26 AM.