Jump to content


Photo

1 X 1098 And 1 X 1275 Stage 1 Cylinder Heads


  • Please log in to reply
2 replies to this topic

#1 A-Series Spares

A-Series Spares

    Super Mini Mad

  • Noobies
  • PipPipPipPipPipPip
  • 695 posts
  • Location: Derbyshire
  • Local Club: DCMOC, Notts about Minis

Posted 16 October 2010 - 07:52 AM

Hello, we have 2 A-Series cylinder heads that we have machined for a customer. He ordered them in June, paid the deposit and after months of us leaving him messages he rang our office earlier this week to say that he is no longer wanting them.

We are now offering these to our friendly Mini Clubs for first refusal, we have already had the deposit so we would like to offer these slightly cheaper to clubs we have seen the most sales from :D) TMF is one of them.

So here is the deal.

Stage 1 Unleaded Head, comes with new valves, guides and unleaded seats


Posted Image

Our cylinder heads have been produced to meet the high demand in the market, Tried and tested on the track, it was the track that gave us the reputation we have today. high quality heads, using top quality components.

A-Series Spares focus as much on reconditioned cylinder heads, using the same technology and standard of materials as we do on our competition heads.

The cylinder heads used are carefully selected and thoroughly checked before being cleaned and any defective parts removed.

Posted Image

The heads are then refaced. refitted with new unleaded valve seats, new valve guides, new valve stem seals and new valve springs.

At this stage each head is tested and inspected before being painted, so that when you receive your reconditioned cylinder head, you have our quality assurance.

Our heads come with the option of being finished in one of three colours, Traditional Green, Sports Red or Black.

Our special price for these two heads only is £295.00 Each


Many thanks for reading. Would like to see these go on a project like they were intended. They won't be around long at this price.

Edited by A-Series Spares, 16 October 2010 - 09:21 AM.


#2 imvarma

imvarma

    Mini Mad

  • Members
  • PipPipPipPip
  • 153 posts
  • Local Club: Tatsu

Posted 03 November 2010 - 09:11 PM

Hi, I'm very interested in your 1098 head, just wondering if it is still available?

I need a new head for my 1098 engine rebuild and am considering either Stage 1 or a Stage 3 head, what would the additional cost be if I wanted this upgraded to stage 3 spec?

Cheers,
AndyV.

#3 A-Series Spares

A-Series Spares

    Super Mini Mad

  • Noobies
  • PipPipPipPipPipPip
  • 695 posts
  • Location: Derbyshire
  • Local Club: DCMOC, Notts about Minis

Posted 03 November 2010 - 09:16 PM

Hi, I'm very interested in your 1098 head, just wondering if it is still available?

I need a new head for my 1098 engine rebuild and am considering either Stage 1 or a Stage 3 head, what would the additional cost be if I wanted this upgraded to stage 3 spec?

Cheers,
AndyV.


Hello, If you could give our office a ring tomorrow on 08008247294 then we can discuss your requirements and the set up you are building etc.

The 1098 head is still available!

Thank you for getting in touch and i look forward to your call tomorrow !


Rob




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users