hi all
when i parked my spi cooper up at work this morning i got out an noticed that the brake lights were still on. i looked back in the car and the switch on the switch panel was illuminated too. i disconnected the switch and they went off. anyone no why?
i think it could be the switch plying up but wondered if theres any other problem.
cheers callum

Brake Light Switch
Started by
Charliezminiz
, Nov 02 2010 10:09 AM
3 replies to this topic
#1
Posted 02 November 2010 - 10:09 AM
#2
Posted 02 November 2010 - 10:13 AM
check brake fluid level before driving again!
#3
Posted 02 November 2010 - 10:22 AM
on of the spade connectors have been broken off for a while now but never had this happen before.
#4
Posted 02 November 2010 - 11:03 AM
There isn't any electrical connection between the stop lights and brake failure circuit & the stop lights shouldn't be live if the ignition is off. All I can think is that broken wire is shorting on the brake cylinder and somehow running to earth through the rear lights via the stop light switch.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users