12 replies to this topic

[MiniCooperMan]

MiniCooperMan's MPI Connector Kit



Kit Includes:

• 1x MPI Cable Harness
• 2x Heatshrink

This kit was a Modification implemented by Rover in their Technical Bulletin #0043 to address reliability issues
for twin point cars where the fan did not correctly connect to the Multi-Point fuel Injection & Temperature sensor
and as such features a new type of Modified Plastic Terminal also fitted with a waterproof Boot to protect the
connection even further. I Have seen a simular Kit supplied by MiniSpares priced at £34.99 plus postage,
I can supply the same Part for less than half the price at £15 + Free P&P this kit also includes Heatshrink
to protect connections after fitting.

Please feel free to contact me via PM if you are interested! or see my eBay auction >> HERE <<

Kindest Regards, Bill "AKA MiniCooperMan"

Edited by MiniCooperMan, 28 November 2010 - 08:34 AM.

[miniman retford]

I just got one from a local Rover dealer £26.00

Edited by miniman retford, 02 November 2010 - 03:17 PM.

[MiniCooperMan]

I just got one from a local Rover dealer £26.00

point taken..if i get 10 or more i can get the price down to £15 regards

[munkey26]

I just got one from a local Rover dealer £26.00

I thought they had all closed down.

[mike174]

I would be interested.

Mike

[MiniCooperMan]

I would be interested.

Mike

hi mike thats three interested...let this run for a week see what happens..have been told by minisport that if the connections are loose this will give the ecu incorrect information...changed mine runs great..why should all of us pay this ammount of money for such a simple thing..spares cost enough as it is.just want to help a few of my fellow friends on tmf...regards bill

[miniman retford]

I just got one from a local Rover dealer £26.00

I thought they had all closed down.

I work next door to a garage that used to be a Rover dealer & they still have the sign up & can still get parts, dont know where from but i have never asked for anything that they couldnt get

[bcjames]

Is this the brown one on the stat housing? If so, mines broken and held on with a cable tie, so I'd be interested.

[MiniCooperMan]

Is this the brown one on the stat housing? If so, mines broken and held on with a cable tie, so I'd be interested.

hi its the latest connector...all joints will be soldered.not crimped.....as said the kit contains all bits required including solder..have fitted one to my mpi nice and tight most excellent.will keep in touch.regards bill

[MiniCooperMan]

Is this the brown one on the stat housing? If so, mines broken and held on with a cable tie, so I'd be interested.

hi its the latest connector...all joints will be soldered.not crimped.....as said the kit contains all bits required including solder..have fitted one to my mpi nice and tight most excellent.will keep in touch.regards bill

yes it is the one that fits on the temp sensor ......bill

[MiniCooperMan]

I would be interested.

Mike

hi mike if your still interested in this connector got the price down to £15 free post note i have fitted these with a waterproof boot .have also been asked to supply the wiper motor connector for self parking type. the price is £6 free post..these corrode badly as water can get in..these sell for £13+post on other sites regards bill

[MiniCooperMan]

Is this the brown one on the stat housing? If so, mines broken and held on with a cable tie, so I'd be interested.

hi see my last listing i sent to mike regarding these connectors regards

[MiniCooperMan]

Original Post now updated