21 replies to this topic

[danny1]

1380 short block with pistons and conrods.
center main strap included as well
as well as kent 276 cam and followers and oil pump

in a ussable condition.

want about £300 ono

located in cornwall but i live in plymouth so could take it from ym work shop to my flat

can send pics if needed

[mattdc2r]

Fancy a swap for a cannondale mtb, nice bike with some expensive bits fitted. Brand new saint rear mech. Just needs brakes.

[danny1]

i have no idea what type of bike that is

any pics

[jamiestevenbell]

what condition is the engine how many miles has it done??? any pics?? many thanks and what pistons does it have

[danny1]

well as far as i know engine is ina good condition as it ran till the car came of the road.

well teh engine is still currently fitted to the car till monday when im dropping the subframe as i need teh 4 pot brakes and lower arms for my other mini.

so i will take pics as soon as its detached from the gearbox

[Scallywag630]

Do you have a head that can go with it for extra money? If, what spec is the head?

[danny1]

i have a spare head which was used with the engine
but i dont belive its anythign special, other than having unleaded valve seats, and a bit of porting workdone

[danny1]

pictures of the engine after id removed it from the car today, mini is now looking very sorry for its self with the frotn end dragging on the floor as i cba to refit the frotn subframe

[Sleepy Stu]

Have you got any pics taken using a proper camera and not your phone? Especially a high quality closeup of the bores?

Edited by Sleepy Stu, 03 January 2011 - 05:21 PM.

[danny1]

Yeah I can try and find a camera, but I don't personaly own one

[danny1]

non phone pics, of the bores, they look worse than they are could prob do with a quick hone,

[danny1]

well i will be going back to my flat in plymouth this sunday so can bring the block there if its easier for collection but if theres no intrest it will be left in my work shop and used as a paper weight

[danny1]

bump

[danny1]

bump

[danny1]

oh just a quick one i for got to say that the block has been drilled and tapped to acept 11 studs, i just for got about it as ive never run a 11 stud cylinder head with the block