7 replies to this topic

[1984mini25]

This is slightly odd, but oh wells. I’m after about 2 or 3 vertical seam trims. Now for the odd bit, I only need the top, straight 17 inches or so.

As I’ve been using them to finish off all the sharp ejects left from chopping off the inner wings and on steel flip front itself, then welding and grind back flush.

So anything will do providing they aren’t too crusty and the only thing holding them together is the paint or filler.

[1984mini25]

[attachment=106254:BUMP_.gif]

[Shifty]

I've got a few old ones I think.

If you're going to Bingley you can have them!!

[1984mini25]

As long as the straight bits are reasonably straight, then they will be ideal for what i intend to use them for.

Will have to wait and see about Bingley though.

[Shifty]

Let me know and I'll chuck them in the car for you.

[1984mini25]

As it stands I can’t afford to go to Bingley, too much in the way of petrol, entry, food and the like to make it worth it.

But I’m still after some seam trims.

[1984mini25]

[attachment=107967:BUMP_.gif]

[CLASSIC-MINI-BITS]

[attachment=107967:BUMP_.gif]

we have some available also a master cylinder + heater unit.