76 replies to this topic

[matt large]

Hi guys, i managed to put a post up in the regional section few days ago but now am a fully pledged member of TMF so am able to post properly.

Based in Tamworth Staffs have been involved with mini's for a while, as most people.

Raced national autograss for a fair few years and have collected quite a few bits and pieces along the way, quite a bit of standard parts as well as tuning parts.

As nobody in the immediate area is doing much in the way of spares we (me and old man) have decided to start selling used spares.

We have a small workshop that we are based from with quite a few bits and pieces already. We will be advertising in the local papers as soon as i can arrange it.

Basically we'd just like to try and help other mini owners with bits and pieces they may need. Not charging the world for bits as we're not a business.

Typically we may not have everything but know enough people through racing who we may be able to point people in the direction of if we cant help.

So if you are in the local area, Tamworth, Birmingham, Staffordshire etc feel free to get in touch if you would like a run over, always nice to meet new faces and see if we have something you may be after.

many thanks

matt large
07779229675

[muzzal 1275]

hi mate im based in atherstone and am always
on the hunt for any parts i may find use for
were in tamworth are you located
josh

[bexiie]

Do you have any turbo parts? Thanks

[matt large]

hi mate im based in atherstone and am always
on the hunt for any parts i may find use for
were in tamworth are you located
josh

based in wilnecote just other side of m42, workshop is bout 10 min away on other side of town, giv us a shout if you fancy a run over some time, not around much this weekend as got exams at uni but can always make time

mat : )

[matt large]

Do you have any turbo parts? Thanks

at present i dont, but i do know of some that i can enquire about, what is it your after?

mat : )

[bexiie]

Do you have any turbo parts? Thanks

at present i dont, but i do know of some that i can enquire about, what is it your after?

mat : )

uprated fuel pump and 998cc turbo pistons

[Sir Cheat]

Engines, 850,998,1098?

Do you have any, If so what are your prices.


Pm me

Edited by Sir Cheat, 07 January 2011 - 07:53 PM.

[monte_coop]

Hello mate,

Thought i knew just about everyone that is into minis in tamworth!! I also have loads of bits so its nice to have a contact in tamworth to share parts! do you or have you had a mini as a daily drive about here as im sure i would know the car if you have... iv had loads over the past 10 years of which im sure you will of spotted. i was in wilnecote for the past 3 yrs and now in lakeside, im after a few bits n bobs that im missing so it would be good to meet up n chat!

[matt large]

998 turbo? ambitious build i like it, have set of 998 rods with pistons but to turbo id have said you'd be better of ordering some new ones especially for that kind of application, might have a facet fuel pump tho, would be used but should be ok,

monte_coop

hi there, had a road going car few years bk, lil orangy red one, minilights etc, did a bit with the club but not much then racing took over so sort of faded away from scene but hoping to get back in it now, do national autograss, got blue transit normally towing a mk2 astra at minute but finishing mini off, yeah always good to meet new faces, may be able to help each other, not realy around this weekend but feel free to drop me a msg or call and pop up one day, workshops easy enough to find, sure i can find some clean mugs for a brew lol

mat : )

[retroracer1275]

im after 2 kirkey race seats if you have any

[cookie4343]

10X6 Weller wheels without tyres, straight, dont matter about paint condition, thanks

[matt large]

only kirkey i have is in own car im affraid, lol, also realy depends on what size your after as all have varying widths,

for some reason i hav 3 6x10s and 1 5x10, must have picked an odd 1 up along the way,

sorry cant help you guys, like said have some stuff but not everything, cheers mat : )

[cookie4343]

only kirkey i have is in own car im affraid, lol, also realy depends on what size your after as all have varying widths,

for some reason i hav 3 6x10s and 1 5x10, must have picked an odd 1 up along the way,

sorry cant help you guys, like said have some stuff but not everything, cheers mat : )

How much you looking for the 3 6x10

[Beej123]

PM'd

[benno1275]

I'm after a Smiths centre binnacle speedo and roll cage if you can hook me up?