This topic is locked
Condition: Fair
Price: £350
Location: Southampton
Bought this showt engine a few months ago since been forced into a change of plans.
The information i have is from the previous owner and not all of the information has been verified.
The block has been bored for the 73.5mm pistons and the crank has been offset ground to 84mm with cooper s conrods and centre main strap fitted. The cam fitted is a 286 and has a belt drive conversion. Has A braided oil feed pipe. The previous owner was using megajolt and as such it has no distributor drive fitted but i have sourced one that will be included.
Unfortunately the union for the oil pressure switch and guage has been broken off. This shouldn't be too difficult to remove would have though an easy out would do the job. As can be seen suface rust hase developed on the deck where it has been stored. I would probably recomend stipping it and getting the block faced and probably a hone aswell. I believe the price is fair due to the parts included. I would however consider offers.
This is collection only.
Cheers
Tim
