10 replies to this topic

[J960mayfair]

hi all was planning to get a whole mini for a low price but the bloke has decided to let me down! so now i need for a cheapish complete mini not looking good atm or even a shell that needs work not botherd about state of from end as will be fibreglass/carbon and boot floor nothing major as planning on putting flat one in! so if anyone is hidding one out there please let me know! thanks all! ideally local kent area please!

[J960mayfair]

Bounce!

[baggy33minis]

99 cooper sport shell with the front end removed.Pretty good condition.£400
[attachment=108872:cooper_sport1_002.JPG].don't get too excited it is now stripped bare.I would be happy to replace both a panels and the passenger door skin at extra cost.I have bought them anyway.

Edited by baggy33minis, 04 March 2011 - 09:29 AM.

[J960mayfair]

Where abouts are you ?

[J960mayfair]

anyone?

[baggy33minis]

a long way from kent.

ng21 0at

[miniQ]

Try ebay? - lots of shells on there but most of them need quite abit of attention: http://shop.ebay.co...._nkw=mini shell

Here is a nice one which needs little to no work and an almost finished good paintjob on it: http://cgi.ebay.co.u...=item3a63b4f53a

Might be able to offer as low as £600 for it

[minimash]

I have a mini thats been stripped down back wheels are still on, engine is out but will come with car only done about 78k and all other bits needs a bit of work but overall its not bad. No front end on it so you can have fibre glass front put on it looking for offers around £450 mark.

http://s947.photobuc...5/ashleyuk2007/

Engine is out now tho. The seats will come with it too if you want them tho as there brown not to everyones taste tho lol.

Give us a pm if your interested if not i'll pop it up in the for sale section.

[Dolly 89]

i might have a shell for sale just had just over 2500 on bodywork done all thats really left to do is to fit the fibreglass front which i have with the car. the rear bins have been cut out and the rear seat bench has been cut off aswell. looks really tidy the rear bumper lip has been shaved down so a bumper wont go onto it atm but all i was going to do was to blob a weld on the end just to smooth it off and run bumperless as it looks really tidy. make me an offer via pm if you think you are interested. it does have a boot lid and has a set of lightened doors which look really tidy which can go with the shell aswell if required

Edited by Dolly 89, 04 March 2011 - 12:19 PM.

[analogue_radio]

I've got a 1990 shell for sale, perfect for doing what you are planning as it's already missing it's front end and boot floor!

Also chopped the companion bins and rear seat out to loose weight.

£150

[J960mayfair]

that would of been great but i still need the rear seats