Ok, Ive had my mini a few months now and just had a couple of problems, but mechanically everything is fine.
My problem however is the body work, and I have a few questions.
I need...(that I know of)
2 new rear inner wheel arches (Both have lots of holes)
The boot hinge panel that includes the bottom part of the lights,
a new boot floor ( i think it has too many holes to be patched up).
New valance and closing panels etc,
New left hand wing + A panel
The front inner wings look bad too especially on the nearside.
New sills and door steps,
new rear subframe,
new front subframe? ( ive been told its bent, hopefully that rather than the car)
So my questions,
Is it worth doing all of this? (money wise) or could I be better to get a cheap new one and use mine as spares.
Say I put everything together and the car is bent, can it be straightened out again?
Also, if I totally strip everything out, could I check to see if it is bent by measuring things etc??
thanks a lot,
pEaCE
DOm
I HATE being miniless....ggrrr
Ahh, is this going to be worth it?
Started by
Telejmp
, Apr 23 2004 04:45 PM
1 reply to this topic
#1
Posted 23 April 2004 - 04:45 PM
#2
Posted 25 April 2004 - 11:10 PM
The repairs that you list are only viable if you can do them yourself. Get a quote from a bodyshop. i would not be surprised if the quote was £500 to £1000.
Whether its worth doing really depends on the value of the car (to you and to sell) and wether its for parts only or parts and labour.
Siggy
Whether its worth doing really depends on the value of the car (to you and to sell) and wether its for parts only or parts and labour.
Siggy
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users