
6x10 Revolution Alloys And Tyres
#1
Posted 17 April 2011 - 08:42 PM
#2
Posted 17 April 2011 - 08:52 PM
#5
Posted 18 April 2011 - 12:14 PM
http://cgi.ebay.co.u...=item2eb4a28eea
i wont be clicking the buy it now button i dont think
#6
Posted 18 April 2011 - 04:15 PM
i got done by someone selling 5 x 12's as 6 x 12's but by the time i had traveeled for like 4 hours i wasn't going home without them, atleast they where cheap so i can sell them on at some pointThey are 5 x 10, not 6x 10 !!!!!!!!!!!!
http://cgi.ebay.co.u...=item2eb4a28eea
i wont be clicking the buy it now button i dont think
#7
Posted 18 April 2011 - 04:27 PM
#8
Posted 18 April 2011 - 04:29 PM
http://www.midlandwh...-483-Black.html <----------------Look at the tyre sizesthey don't make 5x10's do they and the tyres are 165x70x10, so thats a 6x10 wheel isnt it?
#9
Posted 18 April 2011 - 04:45 PM
and also on the revolution website http://www.revolutio...ls.com/4-spoke/http://www.midlandwh...-483-Black.html <----------------Look at the tyre sizesthey don't make 5x10's do they and the tyres are 165x70x10, so thats a 6x10 wheel isnt it?

#10
Posted 18 April 2011 - 06:29 PM
#11
Posted 18 April 2011 - 07:02 PM
even at 450 they are still steep, i know you can still get those dunlops, but most of teh oens you see kicking around second hand are donkeys years old! i certainly wouldnt trust them anyway,
i only just noticed one of the tyres is a cam-crap too! avoid avoid avoid!
#12
Posted 18 April 2011 - 07:11 PM
You cant get 5" new any more, only 6" and the style of the newer 6" rims are deep dish now not like these, so a set of 5 in good condition might be worth a look, but not for that much.
A word of warning though, out of the 4 sets of revolutions I have owned, every set came with one buckled or badly kerbed in some way.
In the end a new set was the best answer.
#13
Posted 18 April 2011 - 08:23 PM
i doubt you could buckle one of them, had to have them machined down in the end they were ridiculous lol!
#14
Posted 18 April 2011 - 09:27 PM

1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users