4 replies to this topic

[mini-man-dan]

1275 Large Valve Head, Crank, Pistons, Camshaft and Lucas Dizzy

Condition: Good[CONDITION OF ITEM (EG. EXCELLENT/GOOD/POOR)]

Location: nr Bristol [LOCATION OF ITEM (REQUIRED)]

Here are some of the engine parts I have for sale:

Large Valve (MG?) 1275 Head with valves and double valve springs. SOLD

1275 CAM6232 Crankshaft. Again looks in good serviceable order with no nasty gouges. £20



Standard 1275 Pistons. All matching with the same numbers stamped on top. Have the old big end bearings in, would be best to replace them but they are there for reference. £20 for the set



Unknown camshaft (how would this be identified??) Came in the same box as the 1275 large valve head so could well be an MG Metro cam. Great condition with smooth lobes (no ridges appearing). £20 once identified


Lucas Electronic Distributor. Believed to be for A+ 1275. No cap or rotor arm just dizzy. Never tested but does look quite new - SOLD

Cheers
Dan
Tel: 07980161704

Edited by mini-man-dan, 04 May 2011 - 03:27 PM.

[moss71]

1275 Large Valve Head, Crank, Pistons, Camshaft and Lucas Dizzy

Condition: Good[CONDITION OF ITEM (EG. EXCELLENT/GOOD/POOR)]

Location: nr Bristol [LOCATION OF ITEM (REQUIRED)]

Here are some of the engine parts I have for sale:

Large Valve (MG?) 1275 Head with valves and double valve springs. I have never tested it but looks to be in good serviceable order. Probably could do with a skim and de-coke before refitting just to make 100% sure. £40



1275 CAM6232 Crankshaft. Again looks in good serviceable order with no nasty gouges. £20



Standard 1275 Pistons. All matching with the same numbers stamped on top. Have the old big end bearings in, would be best to replace them but they are there for reference. £20 for the set



Unknown camshaft (how would this be identified??) Came in the same box as the 1275 large valve head so could well be an MG Metro cam. Great condition with smooth lobes (no ridges appearing). £20 once identified


Lucas Electronic Distributor. Believed to be for A+ 1275. No cap or rotor arm just dizzy. Never tested but does look quite new - £15





Cheers
Dan
Tel: 07980161704

Hi, Interested in the Dizzy if can post?

PM if you like.


Cheers.

[mini-man-dan]

P&P £5 for the dissy.

Head now sold.

Cheers
Dan

[utking]

Hi, don't know if you got my PM's but i'll have the cam, and pistons also the crank, could you measure it for me? was thinking about wear if its good i'll take it like said on PM
Also, does the pistons come on rods?

Thanks mate.

Edited by utking, 07 May 2011 - 02:26 PM.

[mljb59]

if you can let me know if the crank has been regoround previouisly i will take it if still available.

cheers