OK i have the haynes manuel and it gives two torque settings which is the correct one?
Now im trying to run it tonight so i can get ready for work tomorrow :nugget: So i need them ASAP.
Cheers CJ
Cylinder head ASAP
Started by
Pandora
, Jan 15 2006 09:16 PM
4 replies to this topic
#1
Posted 15 January 2006 - 09:16 PM
#2
Posted 15 January 2006 - 09:19 PM
fifty i think
#3
Posted 15 January 2006 - 09:20 PM
Rite ok well we have done that we were just checking which one was mostly given! thanks
#4
Posted 15 January 2006 - 09:23 PM
I know it's too late but aren't the two torques just different scales.
i.e. 50 lb/ft = 68 Nm
So it depends what your torque wrench works in (most have both scales but mine only works in Nm)
Wil
i.e. 50 lb/ft = 68 Nm
So it depends what your torque wrench works in (most have both scales but mine only works in Nm)
Wil
#5
Posted 15 January 2006 - 09:25 PM
Yeh we've got both so it doesnt really explain in haynes that you do it first to 25(stage one) then you go atound them again to (stage two) at 50. So we are goin to get coil back on etc and start her up.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users