17 replies to this topic

[icedaddyuk]

Pair of half leather Rover Recaro

Condition: Good
Price: £75 or swap with some more classic looking seats
Location: Three Bridges, West Sussex

One pair of front Recaros from a Rover 800 (no tilt), half leather.

One seat has slide function, this was the passenger seat.

One seat has no slide but has lumbar, this was the drivers seat. This used to have height adjustment but was removed due to size/weight.

I was going to use the passenger seat for my drivers side and the original drivers side for the passenger as no need for sliding for them. I've decided not to use them as they don't really fit the style I'm going for.

Drivers side leather has a small split as seen in photo.

Edited by icedaddyuk, 04 June 2011 - 06:45 PM.

[the_r_sole]

stain on the seat in the close up is a bit, erm, questionable?!

anyway would you be able to post these or is it a pick up only job?

[icedaddyuk]

stain on the seat in the close up is a bit, erm, questionable?!

anyway would you be able to post these or is it a pick up only job?

Postage would be difficult due to size and weight. Where abouts are you? Could meet somewhere if petrol costs covered?

[the_r_sole]

erm...... northwest scotland on an island!! lol

[icedaddyuk]

ha, couldn't get further away then!

[the_r_sole]

well, if you have trouble shifting them give me a shout, cheers

[icedaddyuk]

He's a thread that shows how to fit very similar mounted seats.

http://www.theminifo...x...5702&st=495

[screech]

Dont suppose you would sell me just the seat runner?


cheers

[icedaddyuk]

yup, for £85 and I'll give you two free seats

[Dexter]

i have some nice classics swap!

[icedaddyuk]

Dexter - PMd

[screech]

yup, for £85 and I'll give you two free seats

LOL worth a try anyway.

cheers

[icedaddyuk]

Bump for those that can collect this weekend

[LeeDJC]

Do you know if the sliding mech will move from the passenger side to the drivers? Not too worried about not having a sliding passenger seat, but need a sliding drivers.

I guess you could fit the seats the 'wrong' way around, but will the seatbelt clips move over?

[wardyxxx]

Do you know if the sliding mech will move from the passenger side to the drivers? Not too worried about not having a sliding passenger seat, but need a sliding drivers.

I guess you could fit the seats the 'wrong' way around, but will the seatbelt clips move over?

1 - As far as i know, the seatbelt clips are different than your mini's belts.

2 - the sliding mech can be moved as the seats should in essence, be the same underneath. But you will have to grind the stops off, remove the ballbearings, make a new bracket on the passenger seat to hold the running mechanism. Its a slow days work to do it properly - i've done ti with my 220 seats.