12 replies to this topic

[djmini92]

Hi all,

I am trying to find some arches, about 3" wide, maybe a bit wider.

I can't seem to find any which are suitable, i bought some sportspack arches but i feel that they are just a little too big.

I would prefer them to be carbon fibre as i have carbon fibre bumpers.


Thanks!

Edited by djmini92, 19 June 2011 - 03:20 PM.

[drewsargent1980]

I have Wood & Pickett classic arche Set they are good for 6x10.s, they are 2.25inch thou, not sure wether they do them in carbon or not thou


http://www.woodandpi...s/wheel-arches/

[dossy]

If you have carbon and are looking to offload your current ones, give me a shout!!

[Sam Walters]

http://www.the-arc-a...sp?CategoryID=5

[greensilver mini]

minisport group 2 wides well i think there called group 2 race on the website but they will work!


oops sorry didnt read the carbon fibre part!

Edited by greensilver mini, 15 June 2011 - 08:23 AM.

[Samini86]

minisport group 2 wides well i think there called group 2 race on the website but they will work!


oops sorry didnt read the carbon fibre part!

Thats what i just got, to cover my 6x10s

[E.L.M.O]

I got 10x6 wellers and I am going to try and make my ground 5 euros work.

[benallen]

in using group 2 wides over my 6x10 whellers...

bit of topic but how much have people found they need to cut into the wheel arch for 6x10 whellers? i will be doing this soon and would rather do it before paint.

cheers, ben

[greensilver mini]

in using group 2 wides over my 6x10 whellers...

bit of topic but how much have people found they need to cut into the wheel arch for 6x10 whellers? i will be doing this soon and would rather do it before paint.

cheers, ben

i think it depends on the ride height at the front to how much you got take off as all minis sit different height!

[benallen]

i did think that yea was just asking for some general experience people have had...

[olds_kool_lews]

in using group 2 wides over my 6x10 whellers...

bit of topic but how much have people found they need to cut into the wheel arch for 6x10 whellers? i will be doing this soon and would rather do it before paint.

cheers, ben

i had to cut my arches at the front to clear my 6x10 wellers, mainly because im running my estate very low lol

[m0useYy]

I got 10x6 wellers and I am going to try and make my ground 5 euros work.

Do your euros fit? Or does it look over-arched?

I'm stuck between euro's or group 2..

[scotty_18]

Is it possible to use mig arches and just cut them down?