5 replies to this topic

[minijames2008]

HI im looking into doing a micra 1.3 16v out of a k11 into my roundnose estate i think this is the simpliest conversion and gives good power/reliability in comparison to the a series. i could probably stretch myself to making a frame but would take me forever and most probably quite a few attempts . all i need to know is how much you want or even a possibility of swapping my 1275 a+ that is currently in my mini for it (exellent runner mint engine) thanks.

[oadamo]

HI im looking into doing a micra 1.3 16v out of a k11 into my roundnose estate i think this is the simpliest conversion and gives good power/reliability in comparison to the a series. i could probably stretch myself to making a frame but would take me forever and most probably quite a few attempts . all i need to know is how much you want or even a possibility of swapping my 1275 a+ that is currently in my mini for it (exellent runner mint engine) thanks.

hi where about are you iam in west mids, i have a mandrel bender and all thats needed to make one, if you have a subframe i could use to make one as iam after one myself for my project.
adam

[Andyagl]

I could have a go if you wanted. built a frame for a K series before and i think this engine would probably be easier. Im in the traders section under Rust and Repairs.

[Artstu]

I could have a go if you wanted. built a frame for a K series before and i think this engine would probably be easier. Im in the traders section under Rust and Repairs.

Have you got any photos of the frame you made? or is that something you're not allowed to do as a trader?

[Andyagl]

These pictures are it pretty much finished. Maybe a bit more strengthening to go in.

[Artstu]

Thanks, looking good so far