16 replies to this topic

[JonBetts]

I have been selling universal weld in and bolt in seat bar kits for a number of years now and have recently done a bolt in set specific to the Mini for those who do not want to weld them in or modify my universal bolt in kit. They can only be fitted in a shell that has had the rear bins removed. Am looking at other designs for cars with the rear bins still in place. They use laser cut 3mm brackets with adjustable mounts to allow for different width seats. The tube is 1-inch CDS and they come painted in a hard wearing matt black finish. All fixings and spreader plates are supplied you just need to drill holes in the side of the tunnel and the sill to fit them. Will accept most styles of seats. Cost is 40.00 per set (one side) or 75.00 for a pair (2 sides) and will give free P&P to TMF members


IMG_6024 by JonBetts1, on Flickr

[JonBetts]

Had another measure up today and think they will actually fit with the rear bins still in place, if anyone has a car that they would like to try these in then please drop me a PM to do a deal

[JonBetts]

IMG_6028 by JonBetts1, on Flickr


IMG_6027 by JonBetts1, on Flickr

[JonBetts]

Here is a picture of a set of bolt in bars in-situ, these are being used for a base mount seat so are a bit closer together than they would be if you were using a side mount seat. You can see how they bolt to the centre tunnel and the sill.


seat bars in car by JonBetts1, on Flickr

[Artful Dodger]

hi jon, im looking for a bar that goes across the top of the wheel arches where the rollcage bolts to the top of? do you do these:) cheers

harri

Edited by MiniclubmanGT, 13 October 2011 - 06:45 AM.

[JonBetts]

If you mean a harness bar rather than seat bars then yes I do, drop me a PM letting me know exactly what you need and i will get it sorted asap for you.

[Artful Dodger]

yes thats the one! thanks i will do:)

[lewis]

These are great, PM sent!

[JonBetts]

Just to confirm the seat bar kits come in pairs (2 per seat required), spreader plates to go under the floor and all mounting hardware so all you need to add is a car and a seat! I have been doing two types so far depending on what seats you are using, either side mount or base mount. I am also making them to order to your measurments to ensure that they fit in your car as I had one set go out and didnt fit as the buyer was using base mount seats. These were swapped to save him having to modify them. If you are interested drop me a PM and we can discuss the options further.
Cheers
Jon

[levinbzr]

Any chance you could make me a set for my levin please? Could you PM me what measurements you need?

Thanks

[JonBetts]

message sent bud

[keefr22]

Hello,

Are you still doing these, as I can't seem to find them listed on your website?

Cheers
keith

[JonBetts]

Yeah still doing them just not got round to listing them on the website yet. Message me on here or email [email protected]

cheers

Jon

[keefr22]

Thanks Jon, I'll have a word with my son tomorrow & get back to you.

Keith

[JonBetts]

OK bud