Jump to content


Photo
- - - - -

Vtec Race Spec - New Owner


  • Please log in to reply
65 replies to this topic

#61 andream88

andream88

    Mini Mad

  • Members
  • PipPipPipPip
  • 169 posts

Posted 04 April 2016 - 07:32 AM

Hi guys,

Does anybody know the correct cutting length for the mini floor when using the race kits?
Measured from the cross section...

Cheers

#62 Luigi33

Luigi33

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 79 posts
  • Location: Aldershot

Posted 05 April 2016 - 08:01 PM

Hi Andrea 655mm was according to the DVD (was originally 630mm corrected to 655mm) but not sure which kit this referred to but it was for the Vtec.



#63 andream88

andream88

    Mini Mad

  • Members
  • PipPipPipPip
  • 169 posts

Posted 05 April 2016 - 10:47 PM

Thanks mate much appreciated

#64 cptkirk

cptkirk

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,799 posts
  • Location: West Sussex
  • Local Club: B.M.C. + Chiminiclub

Posted 14 June 2016 - 07:13 AM

Andrea, any news??



#65 andream88

andream88

    Mini Mad

  • Members
  • PipPipPipPip
  • 169 posts

Posted 16 June 2016 - 02:48 PM

Hi mate,

No big news unfortunately.
I dont have the time to work on her... :-(

Will keep you posted by the way.


Oh, one question:
A few weeks ago I started building the front end and noticed that zcars didnt send me the thin wall M12 nuts required for the hub/upper-wishbone fixing.

Does anybody know where I could source some? There is no space at all for a 19mm socket (27mm external diameter vs the 24,5mm of the hole).

Thanks
Andrea

#66 andream88

andream88

    Mini Mad

  • Members
  • PipPipPipPip
  • 169 posts

Posted 18 June 2016 - 07:11 AM

I will order some of these reduced hex nuts:

http://www.stainless...sort=20a&page=4

I have to check the thread pitch of the ball joints....




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users