First of all we have (Specs taken from Kent website)

KENT 286 Cam, still in the box £100
Power Band
2000-7500
Cam Lift(mm)
7.99mm Inlet 8.22mm Exhaust
Valve Lift(mm)
9.84mm Inlet 10.15mm Exhaust
Duration
280 Deg Inlet 290 Deg Exhaust
Timing
34/66 Inlet 71/39 Exhaust
Full Lift
106 Deg Inlet/ Exhaust
VC (mm)
0.40mm Inlet/ Exhaust
LTDC
2.18mm Inlet/Exhaust
KENT 274 Cam (Sports Injection Suitable for Spi) £80
Brand new never been used just not boxed
Applications
Sports Injection
Power Band
1000-6000
Cam Lift(mm)
7.23mm Inlet 7.13mm Exhaust
Valve Lift(mm)
8.95mm Inlet 8.71mm Exhaust
Duration
284 Deg Inlet 274 Deg Exhaust
Timing
12/56 Inlet 69/25 Exhaust
Full Lift
112 Deg Inlet/Exhaust
VC (mm)
0.40mm Inlet/Exhaust
LTDC
0.58mm Inlet/Exhaust
KENT NASA Mini Stock Spec Cam £70
Not overly sure of the spec’s of this camshaft as it’s one made by Kent to the exact rule and reg’s of the NASA Ministock Series, Once again this cam is new
Piper Mpi 270 Cam £70
Spec found here
http://www.pipercams...hp?pid=BP270MPi
The cam has been fitted in an engine at one point but never fully built up. When removing, it picked up slighty on the cam bearing on the end Journal (oil pump end) and created the line around it. I have run around the journal with some wet and dry and smoothed off so it’s good to go again
Ideally I would like the item’s to be collected so cash on collection as I no longer have a pay pal account. I’m located near Manchester but willing to travel locally to deliver.