3 replies to this topic

[mini_oz]

Hi All

Would anyone have a picture of the boot floor of a Mini MPI with the fuel tank out. We're putting all the mpi fuel injection system into the 1975 Clubby. We have the mpi solid fuel lines and the mpi tank. The fuel lines come in through the boot floor through an oval shaped grommet thingy. Because the fuel lines are solid I can't work out where to cut for them. Obviously our boot floor doesn't have the hole.

Another helpful pic would be the front subframe of mini mpi where the solid fuel lines pass the front subframe.

Thanks

[orcadian]

Hi,
There is an MPI shell on ebay at the moment - no pic of the area you need, but the guy might be helpful and take one if you ask. The section near the toe board at the front is different on the MPI, having an indent for the 3 fuel lines (feed, return and vent) and also there is a shield fixed with 2 studs welded to shell. I made my own lines in Kunifer - my estate shell is longer anyway, so the originals were not useable without extra joints. This also allowed me to make my own pipe route.

Listing number: 130595861168

There might be some bits of help on my website about the fitting of an MPI unit into a Clubman (Estate), but obviously not the pics of the boot floor which you need.

http://www.stallard-...an Estate 2.htm

[mini_oz]

Thanks for the info

[R32Egor]

Hi there.
This is only one i have on the computer i am using at the moment. maybe i have a closer one on another computer.
Hope it is useful. Please copy it as i will remove it soonish

Attached Files

•  DSC_0047.JPG   2.57MB   23 downloads