does anyone have a template for making a dash
dash
Started by
pierce
, May 11 2004 08:17 PM
9 replies to this topic
#1
Posted 11 May 2004 - 08:17 PM
#2
Posted 11 May 2004 - 08:39 PM
#3
Posted 11 May 2004 - 08:44 PM
the image at the bottom can you tell me what the sizes are cause I can't read them and when I enlarge the image I don't get any of the sizes or the image itself
#4
Posted 11 May 2004 - 08:45 PM
that is top knocks!
#5
Posted 11 May 2004 - 08:55 PM
bottom 1180 mm
from middle 215 mm high
now it gets confusing
at each side it angles 35 mm inward and 150 mm up
then it sais the top will be 250 mm across
this gives two angles then a flat top, do what i did, save the picture then zoom in on it
from middle 215 mm high
now it gets confusing
at each side it angles 35 mm inward and 150 mm up
then it sais the top will be 250 mm across
this gives two angles then a flat top, do what i did, save the picture then zoom in on it
#6
Posted 11 May 2004 - 08:56 PM
squint i tell ya lol
#7
Posted 12 May 2004 - 08:28 AM
#8
Posted 12 May 2004 - 04:43 PM
thanks cheese that better than squinting :saywhat: . do they all fit these sizes?
#9
Posted 12 May 2004 - 07:25 PM
i dont know how good they are im afraid, i havent used them yet, im planning to make my dash in the next few months, so will let u know how it goes
#10
Posted 12 May 2004 - 10:20 PM
cheers mate, i find making things yourself are more satifying, because noone else has the same thing
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users