3 replies to this topic

[JonBetts]

New style extended seat brackets made from 2mm laser cut mild steel. These fit to the standard bracket fixing points on the seat crossmember with additional fixing points on the top of the crossmember. These will ideally need M6 rivnuts installing but can also use suitable size rivets or screws. A further extended version will also be available that will go down the back of the crossmember. Price for these are 20.00 per set of 2 or 38.00 for 2 sets plus postage. Finished in satin black and available in the next few days. More new products on the way.....

2012-01-1917.14.52 by JBFabrication, on Flickr

2012-01-2017.44.26 by JBFabrication, on Flickr

[phil hill]

Hi Jon

I could be interested in a couple of sets, but is there any chance they can be offset slightly, which would make them handed unfortunately, to move the seats nearer the center of the car and thus clearing the rear companion bins when extended back on the last few holes ??

Phil.

[JonBetts]

Unfortunatly to do that I would have to redesign them completely, leave it with me and I will see what I can do tho. How much offset do you need?

Jon

[phil hill]

Hi Jon

I would say, without the car at hand to measure, 10mm ish.

Thanks

Phil.