1 reply to this topic

[leighsmith]

998 Unleaded Cylinder Head, removed from a late 1990s mini by a friend and I bought it off him to fit it to my 1098 engine in my kit car after I'd done some 'work' on the chambers. Was bought a 1293 engine for my birthday last year to swap out and this got put to one side and never even touched. It's in decent condition but would need a clean as a minimum before being used.

I'm after £40, and ideally collection for Leicester (home) or Coventry (work)

A series engine parts from an 1100/1300, from the same engine.

1098 block (needs a rebore as pistons had seized in the bores), £20 or it goes in my scrap pile.
1098 standard Crank and matching Conrods, £40
Matched crown and pinion gears. 22G101 15/62 4.1 ratio. £40

I can take more photos and email them if required, all these parts are very heavy so I'd prefer collection but will post at cost.

Attached Files

•  IMAG0539.jpg   1.23MB   6 downloads
•  IMAG0541.jpg   1.17MB   5 downloads
•  IMAG0404.jpg   935.44K   3 downloads
•  IMAG0405.jpg   765.85K   5 downloads
•  IMAG0532.jpg   1.75MB   1 downloads
•  IMAG0531.jpg   1.01MB   1 downloads
•  IMAG0400.jpg   1007.42K   5 downloads

Edited by leighsmith, 15 February 2012 - 09:37 PM.

[apbellamy]

Would you post the crank and rods?