14 replies to this topic

[ANON]

have just got more blasting work in so have now got a bigger cabinet so can offer bead blasting, it's a big cabinet so no problem with automotive bits.

i offer a very quick turn around and can do a while you wait service by arrangement. can also do stuff by post.

will be looking into garnet, walnut, plastic etc but have found bead to be the most versatile so far.

am on the wirral by birkenhead docks, 5 mins from junction 1 M53 and 5 mins from both liverpool tunnels.

[MGBailey007]

looks good mate i might have to send some stuff down when i strip my engine

[ANON]

no worries, just let me know what you want doing and i'll give you a price.

[acrowot]

hi how much would it cost to do a vauxhall gearbox thanks Andy

[Tupers]

How much to do all the alloy casing for a Mini?

[ANON]

hi how much would it cost to do a vauxhall gearbox thanks Andy

is the box stripped or built up?

How much to do all the alloy casing for a Mini?

wok, transfer cover and gear box?

[Andrew O]

How much for a HS4 carb ?

[ANON]

How much for a HS4 carb ?

minimum charge for anything is £10, when i do carb though it gets taken apart so it gets a thorough blast. as long as it's not a 'while you wait' if your screws aren't chewed up i can black them and any other non ally bits for no extra.

[Andrew O]

Alright, Well I would be posting it to you so what would the final cost be including your charge to post it back ?

[Tupers]

wok, transfer cover and gear box?

Yeah wok, transfer case, gearbox, speedo housing and the alloy mounting block.

[ANON]

Alright, Well I would be posting it to you so what would the final cost be including your charge to post it back ?

postage will be at cost, reckon around £5.00?

wok, transfer cover and gear box?

Yeah wok, transfer case, gearbox, speedo housing and the alloy mounting block.

£40 should cover it, that's all the outside and mating faces. if you want the wok, diff, output flange bolts etc blasting and blacking can do them for an extra £15

Edited by ANON, 24 May 2012 - 09:54 PM.

[acrowot]

hi yes the gearbox is built up just want the outside doing would it be possible to bring it up and weight for it to be done thanks Andy

[ANON]

can do it while you wait, would have to sort out a day and rough time though. box will need to be grease/oil free on the outside, empty and any breathers will have to be bunged up.

[acrowot]

hi have you got a number i can contact you on thanks

[ANON]

sent...