I need a peg drive oil pump for a 1275 cooper S. It cannnot be the smaller bore oil pump because it doesn't engage properly won the can due to length. I will take anything, NOS, part used, used, worn out etc. Let me know:). Money waiting Cheers
Cooper S Peg Drive Oil Pump
Started by
Artful Dodger
, Jun 01 2012 05:20 PM
17 replies to this topic
#1
Artful Dodger
-
- Members
-
- 4,435 posts
" I AM THE SPECIAL ONE"
- Local Club: aint no body got time fo dat
Posted 01 June 2012 - 05:20 PM
#2
Artful Dodger
-
- Members
-
- 4,435 posts
" I AM THE SPECIAL ONE"
- Local Club: aint no body got time fo dat
Posted 06 June 2012 - 03:23 PM
bump:)
#3
Artful Dodger
-
- Members
-
- 4,435 posts
" I AM THE SPECIAL ONE"
- Local Club: aint no body got time fo dat
Posted 08 June 2012 - 09:06 PM
bump!
#4
Artful Dodger
-
- Members
-
- 4,435 posts
" I AM THE SPECIAL ONE"
- Local Club: aint no body got time fo dat
Posted 09 June 2012 - 06:58 PM
Cmon!
#5
Artful Dodger
-
- Members
-
- 4,435 posts
" I AM THE SPECIAL ONE"
- Local Club: aint no body got time fo dat
Posted 02 July 2012 - 07:52 PM
bump?
#6
JVA10L
-
- Members
-
- 184 posts
Mini Mad
- Location: Lanark
Posted 03 July 2012 - 08:54 PM
I think I have a used one in the loft - you still looking for one??
#7
Artful Dodger
-
- Members
-
- 4,435 posts
" I AM THE SPECIAL ONE"
- Local Club: aint no body got time fo dat
Posted 03 July 2012 - 09:10 PM
yes!!!
#8
JVA10L
-
- Members
-
- 184 posts
Mini Mad
- Location: Lanark
Posted 03 July 2012 - 09:13 PM
OK I'll have a look for it tomorrow.
#9
Artful Dodger
-
- Members
-
- 4,435 posts
" I AM THE SPECIAL ONE"
- Local Club: aint no body got time fo dat
Posted 03 July 2012 - 09:16 PM
thanks very much, foremostly, can you look at the rotor inside it, becuase if i have to reuse a part of it, thats the part id use :) cheers, you just kept my build on schedule!!
#10
Artful Dodger
-
- Members
-
- 4,435 posts
" I AM THE SPECIAL ONE"
- Local Club: aint no body got time fo dat
Posted 04 July 2012 - 06:32 PM
You found it?
#11
JVA10L
-
- Members
-
- 184 posts
Mini Mad
- Location: Lanark
Posted 05 July 2012 - 12:46 PM
Yup - found it.
Do you mind if I ask why you would want a used oil pump?
Do you mind if I ask why you would want a used oil pump?
#12
5portsrock
-
- Noobies
-
- 7 posts
Just On Tickover
Posted 05 July 2012 - 04:10 PM
If you go on the ausmini forum there is a guy who sells an adaptor from spider cam to slot oil pump drive . i also think minimania in the us sell the same adapter
#13
Artful Dodger
-
- Members
-
- 4,435 posts
" I AM THE SPECIAL ONE"
- Local Club: aint no body got time fo dat
Posted 05 July 2012 - 05:01 PM
Good, yup:)
I am trying to Trying to run a special tuning 649 cam in my 1275 engine. The cam was designed when the cooper s engines were still in production, and so were the oil pumps. As now they are not being made, I need one. My plan is to get your pump, knock out the pin drive bit and install it inside another oil pump. It is doable, I have spoken to someone who has done it, I just need a cooper a oil pump
I am trying to Trying to run a special tuning 649 cam in my 1275 engine. The cam was designed when the cooper s engines were still in production, and so were the oil pumps. As now they are not being made, I need one. My plan is to get your pump, knock out the pin drive bit and install it inside another oil pump. It is doable, I have spoken to someone who has done it, I just need a cooper a oil pump
#14
JVA10L
-
- Members
-
- 184 posts
Mini Mad
- Location: Lanark
Posted 05 July 2012 - 07:25 PM
Yes what you are planning is doable. Back in the dim and distant past when the 1275 Cooper S pump was higher capacity than a normal Mini I actually did this but in reverse namely, converted a new Cooper S pump to fit a 998 block by changing the pin drive shaft.
I think the adapter 5portsrock is taking about is for fitting a slot drive pump to a spider drive camshaft but it might be worth doing a bit of searching for more info.
If you still want to do the pin drive conversion let me know. Meanwhile I will have a closer look at the pump to make sure the drive pin is OK.
I think the adapter 5portsrock is taking about is for fitting a slot drive pump to a spider drive camshaft but it might be worth doing a bit of searching for more info.
If you still want to do the pin drive conversion let me know. Meanwhile I will have a closer look at the pump to make sure the drive pin is OK.
#15
JVA10L
-
- Members
-
- 184 posts
Mini Mad
- Location: Lanark
Posted 05 July 2012 - 08:21 PM
If this is the part you are looking for PM me with an offer
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
