4 replies to this topic

[mini-luke]

fitted to the car? I've been looking for one as I'm not sure how they're arranged with the big square and two bobbin shaped rubber mounts. I've currently got the later hangers, but the exhaust I wanted only comes in the earlier kind. Yes, I could weld some hangers to my new exhaust, but I'm not a fan of the later type anyway as it allows too much side to side movement for my liking.

[petehuws]

What type of exhaust are you fitting? A straight through or side exit? I can take some pics in the morning & show you how I mount mine, (I've got bobbins for straight thru & side exit still installed).

[gav]

This pic gives you a good idea https://minispares.c...~.aspx?2~18~177 the square block fits to the front of the rear subframe (the nuts are already fitted to the subframe) the tag bolts to the square block with the exhaust clamp going around this, the bobbin fits to the rear of the rear subframe through the pre drilled holes and the tag hangs from this in the same manner as the square mount. If you have a centre exit system you will need to drill 2 holes in the rear of the rear subframe and mount the bobbins in the holes you drill :)

[mini-luke]

Thanks Gav, very helpful. All sorted now, will throw up some pics in case someone else needs to know.

[mini-luke]

Excuse the mud, it went swimming a few days ago in the floods!