Hi I have a new plastics for performance mk1 sliding window kit for a mk3 door conversion, which I bought from eBay from someone who abandoned their project. Only problem is no instructions. I have been on to the supplier but after quite a bit of chasing I have given up hope they will send the info through. And I'm hoping their is another forum member that has this kit and confirm what goes where plus supply pics of possible. Any help is appreciated.
Mk1 Sliding Window Fitting To Mk3 On Doors Help Needed !
Started by
si-supercharger
, Jul 10 2012 08:33 AM
5 replies to this topic
#2
mike.
-
- Members
-
- 6,176 posts
Crazy About Mini's
Posted 10 July 2012 - 01:07 PM
I have mk3 streetfighter doors that take mk1 windows, although they might not use the same system as plastics for performance.
If you can some photos of the bits you received in the kit would help
If you can some photos of the bits you received in the kit would help
#3
si-supercharger
-
- Noobies
-
- 48 posts
On The Road
Posted 12 July 2012 - 08:27 PM
Hi thanks for the offer. But plastics for performance sent them through in the end. Glad I waited before trying to figure this out. A bit more involved than I had guessed. Still plenty of time while the weather is rubbish to crack on with the job!.
#4
Ant_L
-
- Noobies
-
- 2 posts
Starting My Mini Up
- Local Club: Crewe's Missiles
Posted 29 August 2012 - 08:20 PM
Hello there Mr. Supercharger,
I'm in a very similar situation as you were in and I'm not having much look obtaining the instructions either.
From what you've said they seem pretty useful (was going to attempt without the instructions but now thought against it) and I was wondering if you could copy them to myself?
I'm in a very similar situation as you were in and I'm not having much look obtaining the instructions either.
From what you've said they seem pretty useful (was going to attempt without the instructions but now thought against it) and I was wondering if you could copy them to myself?
#5
mike.
-
- Members
-
- 6,176 posts
Crazy About Mini's
Posted 29 August 2012 - 10:10 PM
Hello there Mr. Supercharger,
I'm in a very similar situation as you were in and I'm not having much look obtaining the instructions either.
From what you've said they seem pretty useful (was going to attempt without the instructions but now thought against it) and I was wondering if you could copy them to myself?
Try sending him a message incase he doesn't see this
#6
si-supercharger
-
- Noobies
-
- 48 posts
On The Road
Posted 12 September 2012 - 09:15 PM
Hello there Mr. Supercharger,
I'm in a very similar situation as you were in and I'm not having much look obtaining the instructions either.
From what you've said they seem pretty useful (was going to attempt without the instructions but now thought against it) and I was wondering if you could copy them to myself?
Only just seen this. Ping me your e-mail address in a private message and I will send them to you.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
