Hi all.
I brought a chrome Aston cap complete with locking fuel cap.
Problem is, the fuel cap fit's ok, but wont lock. has any come across this problem.
If so, can you tell me a way around this please.. thanks
Aston cap
Started by
Mark1275GT
, Mar 17 2006 10:12 PM
1 reply to this topic
#1
Posted 17 March 2006 - 10:12 PM
#2
Posted 18 March 2006 - 10:53 AM
I had this problem.
Turned out that I had to loosen off my fueltank brace. And push the fuel take further into the top of the wing. So The filler neck was further out of the car.
THen Lock it bac.
Then REALLY PUSH the aston cap onto the filler neck, and do it up.
Good bit of WD40 in the inside mechanism of the Locking cap helps too. But make sure you wipe off the ecess with a rag before you put it on.
<|Ben|>
Turned out that I had to loosen off my fueltank brace. And push the fuel take further into the top of the wing. So The filler neck was further out of the car.
THen Lock it bac.
Then REALLY PUSH the aston cap onto the filler neck, and do it up.
Good bit of WD40 in the inside mechanism of the Locking cap helps too. But make sure you wipe off the ecess with a rag before you put it on.
<|Ben|>
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users