2 replies to this topic

[warning634]

A quick question to those who have fitted a ETB digidash2 into a mini, where is the best place to fit the magnets for the speed sensor??

Pictures of your brackets would help

Cheers

Kevin

[Pistonbroke]

Hi,

I have just fitted mine on to the passenger side pot joint. Secured these on using an epoxy glue. Just make sure to fit the magnets the right way around! Made a sensor bracket to hold the speed sensor in place, needs to be robust to stop the sensor vibrating and loose.As the speed cable runs by the exhaust manifold I went and bought from Merlin Motorsport a heat resistant sleeve. I Have just programmed the unit tonight and I need to jack the front end up slightly to rotate the front wheel to make sure the sensor is reading okay. I will take some pictures then and if you want email them onto you.
Regards,

John (Pistonbroke)

[warning634]

Hi John

Many thanks for your post. I look forward to the pics and any other info that you have on the installation of digidash would be great.

Cheers

Kevin