kent cam 276 used but looks in good condition.
£35
Kent Cam 276 Used But Good Condition...
Started by
mjpuds
, Sep 24 2012 09:38 PM
-
This topic is locked
10 replies to this topic
#2
oltonlad
-
- Banned from Buying/Selling
-
- 2,401 posts
Up Into Fourth
- Location: west midlands
Posted 24 September 2012 - 09:49 PM
any pics?
#3
mjpuds
-
- Members
-
- 337 posts
Speeding Along Now
Posted 24 September 2012 - 09:50 PM
will sort it out in morning
#4
oltonlad
-
- Banned from Buying/Selling
-
- 2,401 posts
Up Into Fourth
- Location: west midlands
Posted 24 September 2012 - 10:13 PM
will sort it out in morning
ok...
#5
mjpuds
-
- Members
-
- 337 posts
Speeding Along Now
Posted 25 September 2012 - 07:04 AM
https://dl.dropbox.c...0925_075717.jpg
https://dl.dropbox.c...0925_075739.jpg
the code on the end of the cam is 390 in
190 ex .. this was fitted in my old 1380 when i bought this engine the spec listed this as a 276 .. it was built up by longman by the owner that i bought it from ...to help the car top 101bhp ...on last r/r...idle very well. and very smooth..
https://dl.dropbox.c...0925_075739.jpg
the code on the end of the cam is 390 in
190 ex .. this was fitted in my old 1380 when i bought this engine the spec listed this as a 276 .. it was built up by longman by the owner that i bought it from ...to help the car top 101bhp ...on last r/r...idle very well. and very smooth..
#6
racingenglishcars
-
- Members
-
- 293 posts
Mini Mad
- Location: Storkøbenhavn
- Local Club: Donn's Backyard Garage
Posted 25 September 2012 - 03:24 PM
Post to Denmark?
#7
mjpuds
-
- Members
-
- 337 posts
Speeding Along Now
Posted 25 September 2012 - 09:53 PM
yup if you sort out payment for postage thats fine..
#8
mjpuds
-
- Members
-
- 337 posts
Speeding Along Now
Posted 25 September 2012 - 09:54 PM
my address is
53 the pastures
kingsworthy
winchester
so237lx
uk
53 the pastures
kingsworthy
winchester
so237lx
uk
#9
racingenglishcars
-
- Members
-
- 293 posts
Mini Mad
- Location: Storkøbenhavn
- Local Club: Donn's Backyard Garage
Posted 26 September 2012 - 11:20 AM
you have pm
#10
mjpuds
-
- Members
-
- 337 posts
Speeding Along Now
Posted 26 September 2012 - 07:30 PM
sold....off...on a journey to Demark...
#11
racingenglishcars
-
- Members
-
- 293 posts
Mini Mad
- Location: Storkøbenhavn
- Local Club: Donn's Backyard Garage
Posted 05 October 2012 - 02:10 PM
Hey Thanks. It came. 
Just like you, I found absolutely nothing on the net about this cam, but my rough measurements at the office give me:
Lift at cam; inlet 0.290, exhaust 0.300
duration; inlet 280, exhaust 290
That is measuring at start of lift, not the standard of 0.010 lift.
This implies a reasonably close clone of the Kent 276 if not a slightly worn version of the same.
Kent 276:
Lift at cam; inlet 0.293, exhaust 0.315
duration; inlet 270, exhaust 280 (measured at 0.010 lift)
So thanks a lot, I'm a happy camper.
Oh yeah; I LOOOVE the packaging tape.
Just like you, I found absolutely nothing on the net about this cam, but my rough measurements at the office give me:
Lift at cam; inlet 0.290, exhaust 0.300
duration; inlet 280, exhaust 290
That is measuring at start of lift, not the standard of 0.010 lift.
This implies a reasonably close clone of the Kent 276 if not a slightly worn version of the same.
Kent 276:
Lift at cam; inlet 0.293, exhaust 0.315
duration; inlet 270, exhaust 280 (measured at 0.010 lift)
So thanks a lot, I'm a happy camper.
Oh yeah; I LOOOVE the packaging tape.
Edited by racingenglishcars, 05 October 2012 - 02:12 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
