Jump to content


Photo

Rear Wheel Arch To Boot Floor Closing Plates Question


  • Please log in to reply
2 replies to this topic

#1 antcole

antcole

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 307 posts
  • Location: Devon

Posted 25 September 2012 - 09:22 AM

Hi folks,
Whilst ripping out the rotten boot floor and heel board i realised that the little square filler/closing plate for the wheel arch to floor panel was rotten as well.
Is this available as a complete piece or does the little radius part of the plate have to be added after?

The radius is the inside of the beginning for the curve of the rear arch.

Posted Image

Posted Image

Any advice on where to get these or how you have tackled the problem would be greatly received.
Thanks

#2 n1tr0_9

n1tr0_9

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 59 posts
  • Location: Cranbrook, Kent

Posted 25 September 2012 - 03:03 PM

You can buy that part as an independant panel

here

http://minispares.co...px|Back to shop

but i did it as two seperate repairs. One accessed from below, then the other once i had cut the rear quarter off. Some pics here.

http://www.theminifo...st/page__st__30

#3 antcole

antcole

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 307 posts
  • Location: Devon

Posted 25 September 2012 - 08:49 PM

Cheers for that, followed your link and ordered both sides.
Thanks again.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users