2 replies to this topic

[Rooboth]

i know this topic has been covered before, but not been able to find a solution.

My hazard lights work ok, brake lights OK, low beam ok half lights ok.

I have no indicators no clicking, no internal or external flashing, On the lights if I put the stalk to main beam the lights go to side lights only but the main beam indication on the dash shows.

I don't have much technical knowledge so could you please keep any advice in simple terms, Thanks.

[HUBBA.HUBBA]

i know this topic has been covered before, but not been able to find a solution.

My hazard lights work ok, brake lights OK, low beam ok half lights ok.

I have no indicators no clicking, no internal or external flashing, On the lights if I put the stalk to main beam the lights go to side lights only but the main beam indication on the dash shows.

I don't have much technical knowledge so could you please keep any advice in simple terms, Thanks.

Could be the stalk. Try sanding the contacts

Edited by HUBBA.HUBBA, 29 September 2012 - 07:32 PM.

[Rooboth]

Cleaned all the contacts in the stalk and the horn works ok.