anyone know if you can get a servo to fit a front/ rear split broking system. am gonna fit 7.5" disc setup with 10inch wheels to my '83 mini that has drums and haynes performance manual recommends the use of one for easier braking?
and am gonna get a 1275 to fit into to the beast and didn't realise that a hs4 can be used on the 1275, but have obtained a hs6? was goin to increase performance of 1275 with a 266 cam and hi lift rockers so would there be any advantage to fitting hs6?
servos and carbs
Started by
rasputin22
, Mar 27 2006 10:12 PM
1 reply to this topic
#2
Wil_h
-
- Members
-
- 3,244 posts
Up Into Fourth
Posted 28 March 2006 - 11:39 AM
The easiest way to get a servo brake setup is to buy a late (1989 on) brake master cylinder and proportioning valve. This should bolt straight on to your pedal box.
The HS6 should be ok. you're probably going to be right on the threshold of the limits of a HS4 and needing a HS6 with the engine spec you are suggesting.
The HS6 should be ok. you're probably going to be right on the threshold of the limits of a HS4 and needing a HS6 with the engine spec you are suggesting.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
