8 replies to this topic

[Moggyton]

Are there any guides on how to change the fuse box and all the fuses, ive looked but cant seem to find anything?
thanks

[Noah]

How to change a fuse? Pull it out, insert new fuse.

What year is the car? Is it MPI, SPI or Carb?

[Moggyton]

How to change a fuse? Pull it out, insert new fuse.

What year is the car? Is it MPI, SPI or Carb?

Its a 1992 mini city and carb, I mean the whole box itself

[Noah]

Take a picture so you know where the cables and fuses go.

Pull them off, two screws hold it on, new one on, re-attatch cables install fuses done.

[Moggyton]

Take a picture so you know where the cables and fuses go.

Pull them off, two screws hold it on, new one on, re-attatch cables install fuses done.

I will give it a go once i order a new box appreciate the help.

[richw911]

This may help you out

Standard 4 fuse box mounted on the bulkhead: -


1 1-2 35amp Brake Lights, Reverse Lights, Direction Indicators & Rear Screen Demister.

2 3-4 25amp Horn, Headlamp Flasher, Brake Failure Circuit & Radio Memory.

3 5-6 25amp Heater Blower Motor, Windscreen Wipers, Washer Motor & Instruments.

4 7-8 15amp Side & Tail Lights & Panel Lights.


1-2 These circuits only operate with the ignition switch at position "II".

5-6 These circuits only operate with the ignition switch at position "I" or "II".


The 4 Fuse box wiring colours should be from top to bottom: -

White - Green
Brown - Purple
Light Green/White - Light Green/Orange
Red - Red/Green


Inline fuses situated behind the air-filter on the bulkhead

* 15amp - Purple/Orange Wire Hazard Warning & Interior Lamps
* 15amp - Brown/Orange Wire Dim-Dip Lighting
* 10amp - Blue/Orange Wire Rear Fog Guard Lamps
* 15amp - Blue/Red Wire Auxiliary Cooling Fan (where fitted)


Earth are the Black wires
Sidelights are Red/Red with Green
Headlights are thick Blue with Red
Main Beam thick Blue with White
Green/blue is for the temperature sender
White/brown is for the oil pressure switch

[Mini-Mad-Craig]

How to change a fuse? Pull it out, insert new fuse.

What year is the car? Is it MPI, SPI or Carb?

Its a 1992 mini city and carb, I mean the whole box itself

Ignore Noah, he has an attitude problem.

[Noah]

How to change a fuse? Pull it out, insert new fuse.

What year is the car? Is it MPI, SPI or Carb?

Its a 1992 mini city and carb, I mean the whole box itself

Ignore Noah, he has an attitude problem.

Harsh.....

You called my Bakewell a mess.

[Moggyton]

This may help you out

Standard 4 fuse box mounted on the bulkhead: -


1 1-2 35amp Brake Lights, Reverse Lights, Direction Indicators & Rear Screen Demister.

2 3-4 25amp Horn, Headlamp Flasher, Brake Failure Circuit & Radio Memory.

3 5-6 25amp Heater Blower Motor, Windscreen Wipers, Washer Motor & Instruments.

4 7-8 15amp Side & Tail Lights & Panel Lights.


1-2 These circuits only operate with the ignition switch at position "II".

5-6 These circuits only operate with the ignition switch at position "I" or "II".


The 4 Fuse box wiring colours should be from top to bottom: -

White - Green
Brown - Purple
Light Green/White - Light Green/Orange
Red - Red/Green


Inline fuses situated behind the air-filter on the bulkhead

* 15amp - Purple/Orange Wire Hazard Warning & Interior Lamps
* 15amp - Brown/Orange Wire Dim-Dip Lighting
* 10amp - Blue/Orange Wire Rear Fog Guard Lamps
* 15amp - Blue/Red Wire Auxiliary Cooling Fan (where fitted)


Earth are the Black wires
Sidelights are Red/Red with Green
Headlights are thick Blue with Red
Main Beam thick Blue with White
Green/blue is for the temperature sender
White/brown is for the oil pressure switch

Very much appreciated, thanks!