just tring to remove a broken stud from the gearbox casing of a 1275 and the stud extractor (the type that you drill then screw in) has snapped in the hole. Because this is harddened i cant drill it out and screw a bigger stud extractor in niether. You can get to the rear of the stud niether. :'(
any ideas on how to get this out would help. cheers
broken stud
Started by
miniman.matt
, Apr 09 2006 02:20 PM
2 replies to this topic
#1
Posted 09 April 2006 - 02:20 PM
#2
Posted 09 April 2006 - 03:28 PM
Easier to get a new casing at this point! See Guessworks!
#3
Posted 09 April 2006 - 03:36 PM
Got plenty of cases here... - Which one you after?
but have you tried welding a nut onto whats left of the stud to get it out?
TTFN,
Dave
but have you tried welding a nut onto whats left of the stud to get it out?
TTFN,
Dave
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users