Yesterday I replaced my minis clutch with a new pre-verto kit from minispares (pressure plate, disc and release bearing). I also replaced the primary gear oil seal. I adjusted the clutch but today it started making a strange whirring noise. It only happens when I press the clutch just a bit, when the release bearing contacts the pressure plate, it even happens when I press the clutch arm with my hand. If I release the clutch or if I fully depress it, it is absolutely silent. Apart from the noise the clutch works as it should.
Anyone else had this problem?
Edited by viri985, 05 February 2013 - 03:04 AM.
