7 replies to this topic

[mini-andrews]

I have taken apart the wing mirrors and cleaned and polished them. I have replaced 2 screws and 1 grub screw but i cant seem to get hold of this end one does any one know where i can get 2 from. thanks

Attached Files

•  mirror1.JPG   29.2K   5 downloads

[KernowCooper]

Not sure they are available seperate, I'd whip round to somewhere like Techfast or a place that sells nuts bolts and ask can they match up the one you have with the right thread and countersunk head, I did a search but drew a blank, or ring up Somerford and ask them if they know on 01249 721 421

[mini-andrews]

Good man thanks ill try in the morning. I have tryed a fue places around me but they have had nothing like that. All they say is good luck.

[KernowCooper]

Or if you know someone with a lathe who could make a couple of new one for a beer token or two ?

I do seem to remember the screw in the bar ends on motor bikes are very close

Edited by KernowCooper, 15 March 2013 - 11:29 PM.

[mini-andrews]

The search begins.

[zuluaga63]

Im also lookimg for the sameones ! I have search in part stores and tool stores if i find them ill let you know
And if you find them let us know
Thanks and good luck!

[KernowCooper]

Someone with a lathe will step in and make a job lot in a minute ?

Edited by KernowCooper, 16 March 2013 - 12:18 AM.

[Dan]

It's called a countersunk oval head I think when you are searching, no idea what size is needed though.