Could anyone confirm the thread size in the caliper that the.brake line screws into... Am i right in thinking its 3/8" UNF? I'm sure I read that somewhere but just want to make sure.
Thanks
Brake Caliper To Brake Line Thread Size
Started by
tommo10
, Mar 27 2013 05:40 PM
7 replies to this topic
#1
tommo10
-
- Noobies
-
- 64 posts
Stage One Kit Fitted
- Location: nottingham
Posted 27 March 2013 - 05:40 PM
#2
tommo10
-
- Noobies
-
- 64 posts
Stage One Kit Fitted
- Location: nottingham
Posted 27 March 2013 - 10:20 PM
Anyone?
#3
joakwin
-
- Members
-
- 958 posts
One Carb Or Two?
- Location: san diego
Posted 28 March 2013 - 06:39 AM
i want to say -3AN
#4
tommo10
-
- Noobies
-
- 64 posts
Stage One Kit Fitted
- Location: nottingham
Posted 28 March 2013 - 09:52 AM
Is there anywhere i could check this?
#5
tommo10
-
- Noobies
-
- 64 posts
Stage One Kit Fitted
- Location: nottingham
Posted 29 March 2013 - 01:01 PM
?
#6
Ethel
-
- TMF Team
-
- 25,987 posts
..is NOT a girl!
- Local Club: none
Posted 29 March 2013 - 01:12 PM
It is 3/8unf if they are original Mini calipers, Metro calipers, and other modern stuff, are metric 10x1. If in doubt try a 3/8 fitting, there are plenty you could borrow on a Mini, 3/8 is about 1/2 a mm smaller diameter.
#7
tommo10
-
- Noobies
-
- 64 posts
Stage One Kit Fitted
- Location: nottingham
Posted 29 March 2013 - 01:58 PM
Ok thanks so is there a difference in 3/8unf and just 3/8?
#8
Dan
-
- TMF+ Member
-
- 21,354 posts
On Sabbatical
Posted 29 March 2013 - 02:07 PM
3/8 is the major diameter, UNF is the thread form. There are other 3/8 threads but they aren't used for Mini brake fittings.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
