I cant remove my choke cable. I can't seem to remove it from that pin hole that it's thread through in the engine.
There's obviously a screw that needs to be loosened to allow it to slide through somehow but it's stuck fast and i don't have anything small enough to do it!
Any ideas on how to get it free using a home-made method? I'm not too hot on my tool knowledge so keep it nice and simple!
Cheers
The screw on the choke cable
Started by
OllyD
, Apr 18 2006 08:01 PM
3 replies to this topic
#1
Posted 18 April 2006 - 08:01 PM
#2
Posted 18 April 2006 - 08:41 PM
which hole? the bulkhead? have you un done the choke puller from the dash rail?
#3
Posted 18 April 2006 - 08:44 PM
I reckon he means the grub screw that it goes through when it attaches to the carb, i would try some mole grips on the body then some big pliers on the screw
#4
Posted 18 April 2006 - 09:22 PM
I reckon he means the grub screw that it goes through when it attaches to the carb, i would try some mole grips on the body then some big pliers on the screw
Hmm i did try that, substituting mole grips for other pliers since i don't have any. It didn't seem to be successful, kinda like using boxing gloves to thread a needle. Any tips to get it shifted? I'm not very experience with tools and car or anything in general, so i'm probably doing it all wrong.
Thanks!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users