As above really. I have a mate that's just brought a project, it has a moulded body kit on which he wants to remove (thank god). He was wondering what would be the easiest way to remove it?
Thanks
How To Remove Moulded Body Kit?
Started by
tommo10
, Mar 31 2013 03:14 PM
4 replies to this topic
#1
tommo10
-
- Noobies
-
- 64 posts
Stage One Kit Fitted
- Location: nottingham
Posted 31 March 2013 - 03:14 PM
#2
Archa
-
- Members
-
- 293 posts
Mini Mad
- Location: Canvey Island, Essex
- Local Club: Essex Mini Club
Posted 31 March 2013 - 03:21 PM
Hammer.
#3
rally515
-
- Members
-
- 3,848 posts
Up Into Fourth
- Location: ask!
Posted 31 March 2013 - 03:28 PM
RIP IT OFFFFFFFFFF!!!!!
or
simply break the bonding at a thin edge/side by giving it a little pull or tapping a small chisel down the seem should do the trick.
or
simply break the bonding at a thin edge/side by giving it a little pull or tapping a small chisel down the seem should do the trick.
#4
Mini-Mad-Craig
-
- Members
-
- 9,298 posts
Crazy About Metro's
- Location: Travelling in a fried out Kombi
Posted 31 March 2013 - 03:42 PM
RIP IT OFFFFFFFFFF!!!!!
They don't call it ripspeed for nothing
#5
sam7
-
- Traders
-
- 165 posts
Mini Mad
Posted 01 April 2013 - 11:04 AM
pneumatic drill or kango would be usefull 
have a look on the inside of the wings there might be some nuts and bolts, and definatly some sealer/filler bit of everything.
not a easy job mate, just try not to damage the panels to much and give ur self a load more work
have a look on the inside of the wings there might be some nuts and bolts, and definatly some sealer/filler bit of everything.
not a easy job mate, just try not to damage the panels to much and give ur self a load more work
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
