5 replies to this topic

[plugfaebervie]

Im having dificulties with fitting my gear cables to a busa mini has anyone had similar problems im finding were the cable runs through the tunnel up to the gear selector itself is a very harsh angle making the cable stiff also looks like i might have to bolt my gear stick further back instead of using previous mini holes.

 

Any help please

 

Alan

[edsmini]

Any photos of where the tab is welded to the frame? Is yours a bolt in cage?

The cable should run under the car them kick upwards to the selector on the gearbox.
Is the selector arm facing upward or downward?

Ed

[plugfaebervie]

Hi Ed,

 

Ill get pics tonight and yes its the bolt in cage. Yeah thought that as per dvd but just seems such a harsh angle ive tried the selector up and down.

[edsmini]

I had to cut my tag off and move it closer to the ground to help the angle.

Ed

[plugfaebervie]

Heres some pics ed hope this is handy

[edsmini]

That tag is welded on there in the wrong place, that would be fine on a Monte Carlo where the gear shifter would be inside the car. (Flat floor) my cable was also too short and I had to make an extension bar. If yours is too short, contact Zcars and ask for one the correct length. They will help you out I'm sure
When did u buy this kit ?

Ed