6 replies to this topic

[brad-the-bear]

hi just wondering if you could help, i have a 276 cam and an a+ block which oil pump drive do i need for this cam below

 

probably me being a retard but i don't think they do a triangle drive pump lol.

 

bear.

 

[mossy2a]

The new oil pumps only come with slot or splie drive now.  I have a cam the same and had to make an adaptorlike the link below to use my cam.

 

http://www.spridgetm...-DRIVE-OIL-PUMP

[Cooperman]

That is a spline/star cam and you need the correct drive pump, GLP141, and the adaptor fitting. These can be a bit hard to fine, but someone on here may have an adaptor.

[brad-the-bear]

bugger anyone got one?

[mossy2a]

There in the same place as the rocking horse poo etc etc..  Make one from plate.

 

 

That is a spline/star cam and you need the correct drive pump, GLP141, and the adaptor fitting. These can be a bit hard to fine, but someone on here may have an adaptor.

 

I woulnt buy a GLP141 (its a spline drive), the adaptor plate only comes with a slot drive in it, as per my original link.

 

I spent hours looking for one and ended up making one from Stainless plate.

Edited by mossy2a, 29 May 2013 - 11:47 AM.

[Cooperman]

The last time I did this I found the correct star-shaped adaptor which was standard for the original. Then I gave away the last one I had to a friend.

[brad-the-bear]

crud, guess its a D.I.Y jobbie then