Hi,
Has anybody measured these pistons in the normal place (part way up the skirt) and written them down during their rebuild?
I know they can vary a little but curious for my rebuild
21253 +60 Pistons
Started by
matnrach
, Jun 10 2013 04:00 AM
4 replies to this topic
#2
Vipernoir
-
- Members
-
- 782 posts
One Carb Or Two?
- Location: Somerset
- Local Club: Minis Unlimited
Posted 10 June 2013 - 01:17 PM
I don't understand your question...
#3
matnrach
-
- Noobies
-
- 63 posts
Stage One Kit Fitted
- Local Club: none
Posted 10 June 2013 - 04:56 PM
Anybody have a measurement for the diameter of a 21253 +60 piston?
#4
Cooperman
-
- TMF+ Member
-
- 23,513 posts
Uncle Cooperman, Voted Mr TMF 2011
- Location: Cambs.
- Local Club: MCR, HAMOC, Chelmsford M.C.
Posted 10 June 2013 - 05:09 PM
You need to specify the measurement datum as all pistons have a slight taper. "Part way up the skirt" in not specific enough.
#5
matnrach
-
- Noobies
-
- 63 posts
Stage One Kit Fitted
- Local Club: none
Posted 10 June 2013 - 07:13 PM
OK 20mm up from the bottom of the skirt but I think the taper is pretty small down there
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
